Aim Oil / Fuel Pressure Sensor 0-5 Bar

The Aim pressure sensor is suitable for oil, fuel and water pressure readings, reading pressures up to 5 bars.

Key Features :

0-5 bars

4 pins 719 male binder

Aim Oil / Fuel Pressure Sensor  0-5 Bar

The 0-5 bar pressure sensor is suitable for oil, fuel and water pressure readings, reading pressures up to 5 bars.

The 0-5 bar pressure sensor is fitted with a male four pins 719 binder connector to suit our loggers and dash display/loggers. 
Many aspects affect the various engine pressures, so knowing your engine has the correct amount of pressure is paramount to longevity and performance.

This sensor is also available in M10 and -3 JIC (3/8-24 UNF) thread options.

---

Connections

MXS, MXG, MXP, MXL (Strada & Pista), MXL2, EVO5, MXm harnesses are fitted with 719 connections. To extend the length between your dash display/logger and the analogue sensor, you will require our 719-719 patch lead available in various sizes from 0.5m - 4 meters in length. For most installations, you will need one of these patch leads.

EVO4, EVO4S Data Logger, Channel Expansion are fitted with 712 connections and require a 712-719 patch lead to connect the sensor. This patch lead is available in 0.5m - 4-meter lengths. Patch leads are available in the optional extras.

---

Technical 

Aim Oil / Fuel Pressure Sensor 0-5 Bar

• Supply: 8-16V
• Accuracy: < +/- 0.5% FS (CLNH – combined non-linearity and hysteresis)
• Characterisation: 500 mV/ 0 bar 4500 mV/ 5 bar
• Consumption: < 10 mA
• Temperature working range: from -20°C to 135°C
• Sealing: IP66
• Housing: 316 stainless steel
• Weight: 30g
• Cable Length: 400mm

 

What's in The Box

Aim Oil / Fuel Pressure Sensor 0-5 Bar

• Aim 0-5 bar pressure sensor

Downloads

	Technical sheet	Race Studio 3