Aim Hall Speed Pick Up Sensor

The Aim non-contact sensor needs a metallic trigger to pass in front of it. It comes with a magnet and locknuts.

Key Features :

Hall effect wheel speed sensor	712/719 connector
2m cable	M8 thread

Aim Hall Speed Pick Up Sensor

Aim Hall Speed Pick Up Sensor (2m cable). The output varies when it meets a magnetic field. The three-wire sensor produces a digital signal.

The sensor consists of a thin piece of metal that passes a continuous current through it. When the sensor is placed in a magnetic field the electrons move to one side of the metal and protons move to the other side of the plate. You will then be able to get a voltage.

The Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Again, a bracket will usually need to be fabricated to mount the sensor in a suitable position. Please ensure that the distance between the sensor and trigger is in a 0.5 – 2.0 mm (0.007-0.07 inches) range.

The sensor only produces around seven volts. When the electrons move to one side a potential difference is produced between the two sides of metal.

---

Connections

712/719 connection will suit EVO4 Data Loggers.

---

Technical 

Aim Hall Speed Pick Up Sensor

• 712 Metal Binder / 719 Plastic Binder Connector
• Power Supply: 10-30 VDC
• Sensibility Distance: From 0.5 to 2,5mm
• Sensor Thread: M8
• Operating Temperature Range: -25 to 70°C
• Waterproof: IP67

What's in The Box

Aim Hall Speed Pick Up Sensor

• 1 x Hall Effect Speed Sensor connector 2m Cable

Downloads

	Technical sheet	Race Studio 3